精选博文

How Temperature Affects Viscosity

  How Temperature Affects Viscosity: Viscosity can be defined as the internal friction that occurs as a material flow, relative to itself....

2017年10月25日星期三

The average molecular weight of macromolecules was measured with a dilution type Ubbelohde viscometer

The average molecular weight of macromolecules was measured with a dilution type Ubbelohde viscometer
1. Diluted Umbrella viscometer, only suitable for those who dissolve the sample, that is, add a certain volume dilution, the sample is easy to dissolve again, without stirring and so on.
2. Water-soluble samples are more suitable for dilution-type black capillary viscometer, organic phase, especially relatively viscous DMF solvent, not suitable for dilution capillary viscometer.
3. dilution of the viscosity of the pipe itself there is an error, generally used for production enterprises quality inspection, such as: chemical fiber plants, etc., require faster, not so accurate all the situation.
4. Scientific research is more suitable for non-dilute type, especially similar to DMF and other viscous solvents.
5. With the Ubbelohde viscometer to measure the average molecular weight of the polymer can refer to the empirical formula (polyester, nylon are applicable), M = (relative viscosity -1) × 10500.
6. Measure several points, that is, more than a few different concentrations of time.
7. With non-dilution capillary test, if the test time is abundant, and the same type of capillary has several roots, or can guarantee the capillary viscometer clean, then you can measure several different concentrations of time, so with more Point extrapolation method to calculate the intrinsic viscosity, and more accurate.
8. The tester should prepare the sample solution in advance, in particular, to ensure that the sample solution dissolved fully, completely, in line with the requirements of the standard method, and the concentration is known, accurate!

Do the same viscosity test and do GPC test the same place, that is, to dissolve the sample to be sufficient, complete, otherwise the data is not accurate. This is why dilution-type capillaries are limited because the dilution capillary itself is smaller than the non-dilution type, but is still relatively small, at least not suitable for dissolving those solvents that are viscous or have a very high intrinsic viscosity Samples, such as polyolefin samples, polyacrylamide samples are typical, too much viscosity, it is not suitable for dilution capillary. In addition, the exact dilution of the concentration, for the dilution of the capillary, it is also a problem. Due to the small size, a little error in the operation may cause the concentration to be inaccurate.

Kent Yuan (Mr.)
Hangzhou Zhongwang Technology Co., LTD.
P  /Wahtsapp: +86 15068109723  E lei@zonwon.com 
 

    

2017年10月17日星期二

The 19th CPC NATIONAL CONGRESS

Xi Jinping delivers report to CPC congress

Xinhua/chinadaily.com.cn | Updated: 2017-10-18 09:18

Xi Jinping delivers report to CPC congress
The Communist Party of China opens the 19th National Congress at the Great Hall of the People in Beijing, Oct 18, 2017. [Photo by Edmond Tang/China Daily]
BEIJING - Xi Jinping on Wednesday started delivering a report to the 19th National Congress of the Communist Party of China on behalf of the 18th Central Committee of the CPC.
Socialism with Chinese characteristics enters new era
Socialism with Chinese characteristics has entered a new era, Xi said.
The theme of the congress is to "Remain true to our original aspiration and keep our mission firmly in mind, hold high the banner of socialism with Chinese characteristics, secure a decisive victory in building a moderately prosperous society in all respects, strive for the great success of socialism with Chinese characteristics for a new era, and work tirelessly to realize the Chinese Dream of national rejuvenation."
"We will unite the Chinese people of all ethnic groups and lead them to a decisive victory in building a moderately prosperous society in all respects and in the drive to secure the success of socialism with Chinese characteristics for a new era," he said.
China is still in an important period of strategic opportunity for development. The prospects are bright but the challenges are severe, he said.
Cause of CPC, nation sees 'historic shifts' in past five years
Xi said that "historic shifts" have been made in the cause of the Communist Party of China and the country in the past five years.
China's GDP rises from 54t to 80t yuan over five years
China's GDP rose from 54 trillion to 80 trillion yuan (about $12.1 trillion) over the past five years, Xi said.
Over 60m people lifted out of poverty in past five years
More than 60 million people have been lifted out of poverty over the past five years, Xi said.
Principal contradiction facing Chinese society has evolved in new era
"What we now face is the contradiction between unbalanced and inadequate development and the people's ever-growing needs for a better life," Xi said.
The evolution of the principal contradiction represents a "historic shift that affects the whole landscape and that creates many new demands for the work of the Party and the country," Xi said.
Previously the principal contradiction was described as one between "the ever-growing material and cultural needs of the people and backward social production."
China has seen the basic needs of over a billion people met, has basically made it possible for people to live decent lives, and will soon bring the building of a moderately prosperous society to a successful completion, he said.
The needs to be met for the people to live a better life are increasingly broad. Not only have their material and cultural needs grown; their demands for democracy, rule of law, fairness and justice, security, and a better environment are increasing, he said.
"While China's overall productive forces have significantly improved and in many areas our production capacity leads the world, our problem is that our development is unbalanced and inadequate," he said.
"This has become the main constraining factor in meeting the people's increasing needs for a better life," Xi said.
Achieving national rejuvenation will be 'no walk in the park'
Citing a Chinese saying that "the last leg of a journey just marks the halfway point," Xi demands every Party member "be prepared to work even harder toward this goal."
"Today, we are closer, more confident, and more capable than ever before of making the goal of national rejuvenation a reality," Xi said.
"Realizing our great dream demands a great struggle," Xi said.
CPC to develop China into 'great modern socialist country' by mid-21st century
Xi said that the Communist Party of China will develop China into a "great modern socialist country" by the middle of the 21st century. The Communist Party of China will take a two-step approach to build China into a great modern socialist country that is prosperous, strong, democratic, culturally advanced, harmonious, and beautiful by the middle of the century, Xi said.

2017年10月10日星期二

Introduction and influencing factors of kinematic viscosity determination of petroleum products

Scope of application
The petroleum product movement tester is designed and manufactured according to the national standard GB/T265. It is used to measure the kinematic viscosity of liquid petroleum products. LCD screen Chinese display, man-machine dialogue interface, preset temperature, test time and other parameters menu prompt input, appearance design is beautiful, is the introduction of new instruments.
Viscosity is one of the main indexes of petroleum products, and viscosity is one of the important factors that affect the biodegradability of base oils. Many domestic lubricants are classified and classified according to their kinematic viscosity of 40oC and 100oC. In practical application, viscosity is an important index to evaluate the flow performance of lubricating oil. It is important for quality identification of petroleum products and their application. Viscosity is large, oil film thickness is large, lubrication performance is good, but the viscosity is too large, will increase the friction resistance, waste of resources.
Kinematic viscosity is the ratio of the dynamic viscosity of a liquid to its density at the same temperature. It represents a measure of the friction of a liquid when it flows under gravity. Kinematic viscosity measurement is the determination of the time at which a certain volume of liquid passes through a calibrated glass capillary viscometer at a constant temperature. The product of the capillary constant and flow time, i.e., the kinematic viscosity of the liquid at this temperature.

Functional characteristics
1. ring type fluorescent lamp illumination, fluoroscopy is good. Easily observed.
2. heater and guide tube and bath parts are made of stainless steel, durable and durable.
3. Automatically calculate the capillary constant and the average product of the test time. The temperature control precision is high and the accuracy is good.
4, computer temperature control, timing, constant temperature, water bath and other parts. Constant temperature bath is small cylinder, round cylinder, double layer, uniform temperature distribution in the bath, the temperature control effect is good.
5. Chinese LCD screen display, man-machine interface, the preset temperature, test time and other parameters, menu input, actuator adopts advanced SSR, its features of no contact, no spark, no action noise, vibration resistance, long life.

Technical parameter:

1, weight: 25kg
2, constant temperature accuracy: + 0.1
3, the number of cards installed capillary: 3 branches
4 ,heater power: 1000W
5, environmental temperature: room temperature to 35 degrees
6, temperature control settings: room temperature to 100 degrees set at any time
7, work power supply: 220V + 10% 50Hz
The main factors influencing the determination of kinematic viscosity:
First, the measurement of the factors:
1. Stopwatch: The stopwatch is used to determine the time the sample flows through the viscometer. If the stopwatch is not precise enough, it may cause a test error. Therefore, for the use of the stopwatch, be sure to regularly test.
2. viscometer coefficient: capillary viscometer must be calibrated on a regular basis, otherwise it will cause a greater error.

Second, the experimental operation of the factors
1, the viscosity of the process of measuring the flow of oil through the viscometer
The flow time of the specimen must be within the specified range. GB / T265 provides that the flow time to> 200S. Mainly in order to ensure that the oil flow in the viscometer for the laminar flow. If the oil flow rate is too fast beyond the specified range, will become turbulent, with turbulence can not use the cassace equation to calculate the viscosity of oil. In addition, the flow rate is too fast, the reading error will increase accordingly. If the oil flow rate is too slow, within a specified time is not easy to maintain constant temperature
2, the viscosity of the test process bath temperature accuracy
Determination of kinematic viscosity to be strictly in accordance with the provisions of constant temperature test, which is the determination of oil moving viscosity of one of the important conditions. In GB / T265, the temperature control accuracy of the thermostatic bath must be ± 1oC, while in the ASTMD445 bath temperature control accuracy of ± 0.5oC. Because the viscosity of the oil sample decreases with increasing temperature and increases with the temperature drop, it must be strictly in accordance with the specified constant temperature, the slight temperature deviation will make the viscosity measurement results have a greater error.
Third, the viscosity of the other factors in the determination process
Test oil samples containing impurities, moisture and capillary viscometer is not washed, will also affect the sample in the capillary viscometer in the normal flow, the results are high. The solvent used for the washing in the viscometer is not dry and the sample is diluted so that the result is low.
When measuring the viscosity of the oil, the sample in the viscometer can not have air bubbles. If the oil bubbles will affect the oil volume, while entering the capillary will form a gas plug, so that the flow resistance of oil increased, the determination of high results.


Kent Yuan (Mr.)
Hangzhou Zhongwang Technology Co., LTD.
P  /Wahtsapp: +86 15068109723  E lei@zonwon.com 
 

    

2017年9月27日星期三

Test Standard for Most of Materials

Abbreviation

Result
Type
China Stander
Solvent
Capillary type
TEMP(℃)
Washing solvent
Foreign standards
PET

Intrinsic viscosity
聚对苯二甲酸乙二醇酯
Polyethylene terephthalate
GB 17931-03
GB/T14190-08
GB/T 1632.5-08
phenol tetrachloroethane(3:2)0.88
phenol tetrachloroethane(1:1)0.84
Ⅰc:0.84
25
Chloroform、Acetone
ISO 1628-5
ASTM D 4603
PBT
Intrinsic viscosity
聚对苯二甲酸丁二醇酯
英文名polybutylene terephthalate
FZ/T51005-11
phenol tetrachloroethane(3:2)0.88
Ⅰc
25
Acetone
ISO 1628-5
DIN 53727/3
PA


Intrinsic viscosity
聚酰胺(尼龙)
Polyamide/Nylon
GB/T12006.1-09
Sulfuric acid(96%)
Ⅱ:1.13
25
Sulfuric acid
ISO 307
Formic acid(90%)
Ⅰ:0.63
25
甲酸(90%)
ISO 307
ASTM D 789
m-Cresol
Ⅱ:1.13
25
Dichloromethane
DIN 53727
ISO 307
PAM
Intrinsic viscosity->molecular weight
聚丙烯酰胺(水处理剂)Poly(acrylamide)
GBT12005.1
Sodium chloride
4-0.55
4-0.57
30
铬酸洗液,水

PC
Viscosity(reduced viscosity)
聚碳酸酯
Polycarbonate
HG/T 2234-91
Dichloromethane
0c:0.47
25
Dichloromethane
ISO 1628-4
PVC
Viscosity(reduced viscosity)、constant value
聚氯乙烯
Polyvinyl chloride
GB/T 3401-07
环已酮
Ⅰ:0.63
Ⅰc :0.84
25
Acetone
ISO 1628-2
ASTM D1243
TP
Viscosity(reduced viscosity)
热塑性均聚和共聚型聚酯
Thermoplastic polyester(TP) homopolymers and copolymers
GB/T1632.5
phenol tetrachloroethane(3:2)
Ⅰc :0.84
25
Acetone
ISO 1628-5
PCT
Viscosity(reduced viscosity)
聚对苯二甲酸环乙烯二亚甲基醇脂
GB/T1632.5
phenol tetrachloroethane(3:2)
Ⅰc:0.84
25
Acetone
ISO 1628-5
PEN
Viscosity(reduced viscosity)
聚萘二甲酸乙二醇酯
polyet hy2 lene nap ht halate
GB/T1632.5
phenol tetrachloroethane(3:2)
苯酚/三氯苯酚(3:2)
Ⅰc:0.84
25
Acetone
ISO 1628-5
URU
Viscosity/Intrinsic viscosity
聚氯醚树脂
Poly vinyl chloride resin
HG/T3605
环已酮:亚甲基酸(250:1)
3-0.59
50
环已酮

POM
Viscosity/Intrinsic viscosity
聚甲醛树脂
Polyformaldehyde/acetaln resins
HG/T3604
对氯苯酚:α-蒎烯(98:2)
3-0.71
60
对氯苯酚


Viscosity(reduced viscosity)
聚对苯二甲酸烷撑二脂
HG/T2364
苯酚:二氯苯(1:1)
间甲酚
Ⅰc:0.84
Ⅱ:1.13
25
铬酸溶液
ISO 1628-5
PAN
Intrinsic viscosity
聚丙烯腈
Polyacrylonitrile

氯化锂\Dimethylformamide溶剂
Ic:0.84
25
Dimethylformamide,Acetone

PMMA

聚甲基丙烯酸甲酯
Polymethylmethacrylate
HG/T2626-94
HG/T2627-94
三氯甲烷
0c:0.47
Ⅰ:0.63
25
Acetone
Chloroform

ISO 1628/6
PP
Viscosity(reduced viscosity)
聚丙烯
polypropylene
GB/T 1632.3-10
decahydronaphthalene(加稳定剂)
0b
0a:0.53
135
decahydronaphthalene(工艺级)
DIN 53728/4
ISO 1191
PE
Viscosity(reduced viscosity)
聚乙烯
polyethylene
GB/T 1632.3-10
decahydronaphthalene(加稳定剂)
0b
0a:0.53
135
decahydronaphthalene(工艺级)
ISO 1628-3
ASTMD1601
PS
Intrinsic viscosity
聚苯乙烯
Polystyrene

Toluene
Ⅰ:0.63
25
Toluene、Acetone

PIB

聚异丁烯
Polyisobutylene

Dimethylformamide
Ⅰc :0.84
25
Dimethylformamide,Acetone

PSU

聚砜
polysulfone

N-Methyl-2-pyrrolidone
Ⅰc :0.84
25
N-Methyl-2-pyrrolidone
Acetone

PLA

聚乳酸酯
Polylactic Acid/
Polylactide

Chloroform
0c:0.47
25
Chloroform、Acetone

SAN

苯乙烯/丙烯腈共聚物
acrylonitrile-styrene copolymer

Dimethylformamide
Ⅰc:0.84
25
Dimethylformamide
Acetone

SB

苯乙烯/丁二烯共聚物
Styrene/butadiene copolymer

Toluene
0c:0.47
Ⅰ:0.63
25
Toluene、Acetone

TPU

热塑塑料聚氨基甲酸乙酯/聚氨酯Ethyl carbamate
Polyurethane/

Dimethylformamide
Ⅰc:0.84
25
Dimethylformamide
Acetone

PU

聚氨酯(聚氨基甲酸酯)
polyurethane

Dimethylformamide




CA
Viscosity、viscosity ratio
乙醋纤维素
HG/T 2758
Dichloromethane Methanol solvent
M1
25

ISO 1157
Chitin
Intrinsic viscosity->Averagemolecular weight
甲壳素
Chitin
SC/T 3403
ChemicalBookⅥG
Acetic acid

25
30
Distilled water

MCC
Intrinsic viscosity->Averagemolecular weight
微晶纤维素

AVICEL PH;AVICEL PH 101(R)
ChemicalBookⅥG
CUPRIETHYLENEDIAMINE
Oc:0.47
Ic:0.84

10%Acetic acid
BASF

Intrinsic viscosity->Averagemolecular weight
羟丙甲纤维素
Hypromellose
ChemicalBookⅥG
Distilled water
Oa:0.53




kinematic viscosity
硅油类
Polydimethylsiloxane


根据粘度范围

Methanol60-90


Specific viscosity->Polymerization Degree
浆柏\棉纤维
Pulp \ cotton fiber
GB/T9107(0.80)
铜氨溶液
Ⅰ:0.63
25
10%Acetic acid


limit viscosity
水处理剂
Water treatment agent
GB/T22593-2008

Oa:0.53
30



Intrinsic viscosity(马丁法)
粘胶纤维用浆粕(棉/木/竹/麻浆粕)
Pulps for viscose fibres (cotton / Wood / bamboo / hemp pulp)
FZ/T
50010.3-1998


20

ISO 5351/1

relative viscosity->Intrinsic viscosity->Polymerization Degree
兰麻 纤维素
Bast fiber
GB 5888-86
铜乙二胺溶液
bis(1,2-ethanediamine-n,n')-copper(dihydroxide) 
奥式0.5 0.6
25
10%Acetic acid
Polymerization Degree
PVAL
AveragePolymerization Degree
聚乙烯醇树脂
polyvinyl alcohol
GB 12010.5
Distilled water
Distilled water
奥 0.6
30

Polymerization Degree

AveragePolymerization Degree
聚乙烯醇
polyvinyl alcohol,vinylalcohol polymer
GB 12010.5
Distilled water
Distilled water
奥 0.6



PPS





250











Kent Yuan (Mr.)
Hangzhou Zhongwang Technology Co., LTD.
P  /Wahtsapp: +86 15068109723  E lei@zonwon.com